58
Faxing: Reports
■
The name or telephone number of the fax machine you
were communicating with (DISTANT STATION ID). If
you were sending a fax, the telephone number or the
Location ID is printed. If you were receiving a fax, the
remote fax machine’s Personal ID or its telephone
number is printed.
■
The communication mode used for each transmission or
reception.
■
The number of pages sent or received.
■
The result of each communication.
■
Service codes. Be sure to report these diagnostic codes if
you contact your Authorized OKIFAX Dealer about
communication problems.
Note:
This report does not list messages that were re-
ceived without errors.
Broadcast Confirmation Report (MCF)
Use this report to confirm the results of a multiple-loca-
tion transmission (broadcast). Information provided on
this report includes:
■
The date and time at which the broadcast started.
■
The total amount of time used to complete the broad-
cast.
■
For each location, the Location ID, the number of pages
sent and the result of the communication.
Phone Directory
This report provides a complete listing of all of the tele-
phone numbers programmed into your OKIFAX’s One
Touch keys, Auto Dial codes and groups. The informa-
tion includes:
■
The Location ID and main fax number for each One
Touch key and Auto Dial code.
■
The alternate number (OR) for each One Touch key.
■
The One Touch Parameter settings for each One Touch
key (PRM. ECHO).
■
A listing of all of the One Touch keys and Auto Dial
codes included in each group.
Configuration Report
The configuration report provides a list of the current op-
erational settings of your OKIFAX. The information in-
cludes:
■
The current settings of all user functions (except for One
Touch Parameter settings, which appear in the telephone
directory).
■
The Sender ID (ID=), TSI/CSI (TEL NO.), and call back
number currently programmed into your OKIFAX.
■
Current dial parameter settings.
Of5050hw.pm6
4/15/98, 9:32 AM
58
