5
Regulatory Information
All Countries / Regions
ENERGY STAR
®
As an ENERGY STAR Partner, Oki Data has
determined that this product meets the
ENERGY STAR guidelines for energy efficiency.
Year 2000 Compliance
This product is Year 2000 Compliant. It
contains information technology that accurately processes date
and time data between the years 1999 and 2000, and carries
no issue for the September 9, 1999 (9999) programming
concern. This product, when used in combination with products
purchased from other manufacturers, whose products properly
exchange data and time information, will accurately process
the date and time.
Federal Communications Commission (FCC)
Declaration of Conformity
1. Product Identification
Product Name: MICROLINE 8810, 8810n
Model No.: D21111A
2. Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
3. Responsible Party
Oki Data Americas, Inc.
2000 Bishops Gate Boulevard
Mt. Laurel, NJ 08054-4620
1-800-654-3282 (1-800-OKI-DATA)
FCC Radio Frequency Interference Statement
Important!
This printer is FCC and IC Class A compliant
when the network card is installed.
For Network Models
WARNING: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct
the interference at their own expense.
Note:
It is the responsibility of the user to obtain the
required shielded cable in order to ensure
compliance of this equipment with FCC regulations.
Changes or modifications not expressly approved by Oki Data
may void your authority to operate this device.
For non-Network Models
WARNING: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Plug the unit into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/television
technician for help.
Note:
It is the responsibility of the user to obtain the
required shielded cable in order to ensure
compliance of this equipment with FCC regulations.
Changes or modifications not expressly approved by Oki Data
may void your authority to operate this device.
Industry Canada (IC)
Radio Interference Statement
Important!
This printer is FCC and IC Class A compliant
when the network card is installed.
For Network Models
This Oki Data apparatus complies with the Class A limits for
radio interference as specified in the IC Radio Interference
Regulations.
For non-Network Models
This Oki Data apparatus complies with the Class B limits for
radio interference as specified in the IC Radio Interference
Regulations.
European Council of the European Communities
Statement of Electromagnetic Conformance for
220/240-Volt Models
This product complies with the requirements of the council
Directive 89/336/EEC on the approximation of the laws of the
member states relating to electromagnetic compatibility.
Statement of Safety Conformance for 220/240-Volt
Models
This product is in conformity with Directive 73/23/EEC on the
harmonization of the laws of Member States relating to
electrical equipment designed for use within certain voltage
limits.
