Fast, reliable printing performance with
Auto Skew Correction, Location-Free
Paper Load, and Auto Head Gap
A unique combination of convenience features
The ML8810 Series is designed to make
your life easier and less complicated. It
provides flexible forms handling to increase
productivity, printing specialty media in
addition to standard Impact printer media.
A variety of paper paths
allows for feeding
media via the front or rear of the printer:
Orange
– Manual feed with media exiting
front of printer
Green
– Manual feed with media exiting
rear of printer
Blue
–
Rear Tractor Feed (Option) with
media exiting front of printer
Red
– Front Tractor Feed with media
exiting rear of printer
Auto Skew Correction
– Unlike conventional
flatbed printers, the ML8810 Series can take a
single sheet or form that is manually fed on an
angle (up to 7˚) and automatically straighten it
before feeding it into the printer.
Consequently, text placement is accurate and
precise throughout the entire document—ideal
for longer forms that tend to skew.
Location-Free Paper Loading
– Sheets
or forms can be hand-fed at virtually any
point across the printer table; the ML8810
Series printer will sense the entry point
and properly position the printhead.
Perfect for printing wider forms and
accommodating end users who don’t want
to spend the time to properly line up each
and every cut-sheet form.
Auto Head Gap Adjustment
–
ML8810 printers
adjust automatically to accommodate different
media. The printhead calculates the precise
impact needed to print each dot and automatically
adjusts its position. This virtually eliminates
uneven printing: the shape of each dot is more
consistent, and there are no gaps, smears or light
spots, regardless of the media type.
Media fed on an angle (up to 7°) is automatically straightened
Media can be hand-fed at virtually any point across printer table
Paper Stacker
Multiple paper paths
of the ML8810 Series
(see details below)
Step 1 – Built-in sensor detects thickness of print media
Step 2 – Platen is automatically adjusted to accommodate media
Step 3 – Platen is returned to original position after printing
Platen
Printhead
Print Media
