manualshive.com logo in svg

Oki ML620, User Manual, Page: 9 / 100

Share
Download
Oki ML620 User Manual Download Page 9

ML620/ML621 User’s Guide

  

Control Panel Indicator Light Functions 

Indicator Light

Color

Status

Explanation

ALARM

Red

ON

The paper is at its end; i.e., no paper present.

OFF

Paper is present.

Flashing

When flashing with 

SEL

: unrecoverable status alarm. Turn the 

power OFF, verify that the carriage moves properly, then turn 

power ON again. May indicate: a paper jam, media alarm, 

thermal alarm (head/space/feed)

When flashing together with the 

TEAR

 light, indicates high 

temperature alarm status.

SEL (Select)

Green

ON

Printer is online; ready to receive data and print.

OFF

Printer is offline; not ready to receive data and print.

Flashing

When flashing with 

ALARM

: unrecoverable status alarm. Turn 

the power OFF, verify that the carriage moves properly, then 

turn power ON again. 

When flashing together with the 

TEAR

 light, indicates the Top 

Cover is open.

TEAR

Green

ON

Printer is in Menu mode.

OFF

Printer is in Tear down position.

Flashing

Printer is in Tear up position.

Summary of Contents for ML620





































































































Reviews:

No comments