SETTING UP YOUR PRINTER > 21
T
OP
FEED
SINGLE
SHEET
PAPER
Your printer can accommodate single sheets of 216mm width x 297 or
355mm length paper. Remove the Tractor Feed
unit
and any other
accessories, then raise the
Paper Separator
into its upright position.
1.
Switch the printer
ON
.
2.
Move the
Paper lever
(1) (on the right-hand side of the printer)
to the rear of the machine, to the
Blank sheet of paper
symbol.
3.
Ensure that the printer is
OFF-LINE
(press the
SELECT
switch if
necessary).
Make sure the
Bail arm lever
(2) is set to the rear of the machine
(in its closed position).
4.
Raise the paper separator as shown above.
5.
Adjust the
Cut Sheet guide
(3) on the
Paper Separator
to
position the left edge of the sheet.
NOTE
If letter size paper is used, set the cut sheet guide to the line mark on the
paper separator. 80 character width text (10cpi) is then positioned
centrally on the paper.
1
2
3
Summary of Contents for ML280 Elite
Page 1: ...ML280 ELITE user s guide...
