7 - English
Regulatory Information
ENERGY STAR
®
As an ENERGY STAR Partner, Oki Data has
determined that this product meets the
ENERGY STAR guidelines for energy
efficiency.
Federal Communications Commission
(FCC)
Declaration of Conformity
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Responsible Party
Oki Data Americas, Inc.
2000 Bishops Gate Boulevard
Mt. Laurel, NJ 08054-4620
1-800-654-3282 (1-800-OKI-DATA)
FCC Radio Frequency Interference Statement
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Plug the unit into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/television
technician for help.
Note: It is the responsibility of the user to obtain the
required shielded cable in order to ensure
compliance of this equipment with FCC
regulations.
Changes or modifications not expressly approved by Oki
Data may void your authority to operate this device.
FCC Administrative Council for Terminal
Attachment Requirements for End Users
This device has been granted a registration number by
the Administrative Council for Terminal Attachment
(ACTA), under Part 68 and ACTA rules and regulations for
direct connection to the telephone lines. In order to
comply with these FCC rules, the following instructions
must be carefully read and applicable portions followed
completely.
1. This equipment complies with Part 68 of FCC rules and
the requirements adopted by the ACTA. On the back of
the equipment is a label that contains, among other
information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this inf
2. The following USOC jacks may be used with this
equipment: RJ11C.
3. A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements
adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is
designed to be connected to a compatible modular jack
that is also compliant. See installation instructions for
details.
4. The REN is used to determine the quantity of devices
which may be connected to the telephone line.
Excessive RENs on the telephone line may result in the
devices not ringing in response to an incoming call. In
most, but not all areas, the sum of the RENs should not
exceed five (5.0). To be certain of the number of
devices that may be connected to the line, as
determined by the total RENs, contact the local
telephone company. For products approved after July
23, 2001, the REN for this product is part of the
product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are
the REN without a decimal point (e.g., 03 is a REN of
0.3). For earlier products, the REN is separately shown
on the label.
5. If the equipment, MC873dn/MC873dnc/MC873dnx,
causes harm to the telephone network, the telephone
company will notify you in advance that temporary
discontinuance of service may be required. But if
advance notice isn’t practical, the telephone company
will notify the customer as soon as possible. Also, you
will be advised of your right to file a complaint with the
FCC if you believe it is necessary.
6. The telephone company may make changes in its
facilities, equipment, operations, or procedures that
could affect the operation of the equipment. If this
happens, the telephone company will provide advance
notice in order for you to make the necessary
modifications to maintain uninterrupted service.
7. If trouble is experienced with this equipment
(MC873dn/MC873dnc/MC873dnx), please contact the
following for repair and/or warranty information:
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mount Laurel, N.J. 08054-4620
Telephone:(856) 235-2600 or
(800)-OKIDATA (800-654-3282)
If the equipment is causing harm to the telephone
network, the telephone company may request that you
Product Name
Model Name
MC873dn
N35200A
MC873dnc
N35200A
MC873dnx
N35200A
530 Sheet Paper Tray
N35110A
Wireless LAN
DNUB-01
