manualshive.com logo in svg

Oki MC573dn, User Manual

Share
Download
Oki MC573dn User Manual Download Page 56

- 56 -

2. Setting Up

Connecting to a Wireless LAN (Only When the Wireless 
LAN Module is Mounted)

Wireless LAN connection is disabled by default. To use the wireless LAN connection, enable 
Wireless in the Admin Setup.

•

Before Connecting to a Wireless LAN

•

Enabling Wireless LAN Connection

•

Connecting to an Access Point (Infrastructure)

•

Setting up [Enabling Default Gateway]

•

Connecting to the Machine Directly (AP mode)

• Wireless(Infrastructure) and Wireless(AP Mode) cannot be enabled at the same time.

• If the machine is used in a wireless network environment, the machine does not enter Deep Sleep mode but enters 

Sleep mode.

• Do not place any electric products that emit weak radio waves (such as microwaves or digital cordless telephones) 

close to the machine.

• The communication speed of a wireless LAN connection may be slower than that of a wired LAN or USB connection 

depending on the environment. If you want to print big data such as a photo, it is recommended to print with a wired 
LAN or USB connection.

Connecting to an Access Point

Before connecting this machine to a wireless LAN access point, check the following.

1

Check if your wireless LAN access point matches the following requirements.

Standards: IEEE 802.11 a/b/g/n
Access method: Infrastructure mode

Before Connecting to a Wireless LAN

Summary of Contents for MC573dn




































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands