Oki MC573 Advanced Manual Download Page 498

Page: 498 / 507

- 498 -

11. Utility Software

Network Extension

In Network Extension, you can check the settings on this machine and set the composition of
the options.

In order to use Network Extension, TCP/IP needs to be activated.

This requires administrator rights.

• Network Extension is automatically installed when installing a printer driver through a TCP/IP network.

• Network Extension works in conjunction with the printer driver. Do not install only Network Extension.

• Network Extension only functions when the printer driver is connected to OKI LPR port or the standard TCP/IP port.

• Showing Printer Properties
• Checking the Settings of the Machine
• Set Options Automatically
• Uninstall the Utility

To use Network Extension, open the printer properties screen.

Click [Start], and then select [Devices and Printers].

Right-click the printer icon, and then select [Printer properties].

Showing Printer Properties

Summary of Contents for MC573




























































































































































































































































































































































































































































































































Search results

Summary of Contents for MC573

Reviews:

Related manuals for MC573

Brands by name

Popular brands

Oki MC573, Advanced Manual

Search results

Summary of Contents for MC573

Reviews:

Related manuals for MC573

Brands by name

Popular brands