Oki MC573 Advanced Manual Download Page 410

Page: 410 / 507

- 410 -

11. Utility Software

• Device name: MC573

• IP address of the machine: 192.168.0.2

Displaying the Machine Status

Open the Web page of this machine.

Open the Web Page of This Machine

The following screen is displayed.

You can check the remaining amount of the consumables, printing counter, and
information of network and system of this machine.

You can change settings of this machine from the following tabs.

• Paper Setup

You can set a paper size and type for each tray. You can specify the output tray for the copy,
scan, print, and fax functions respectively.

Summary of Contents for MC573




























































































































































































































































































































































































































































































































Search results

Summary of Contents for MC573

Reviews:

Brands by name

Popular brands

Oki MC573, Advanced Manual

Search results

Summary of Contents for MC573

Reviews:

Brands by name

Popular brands