Oki MC573 Advanced Manual Download Page 315

Page: 315 / 507

- 315 -

8. Editing Address Book

E-mail Address

This section describes how to register/delete e-mail addresses and e-mail groups in or from
the address book of the machine.

You can register/delete them from a computer using the Web page of the machine or Configuration Tool.

• Registering an E-mail Address from the Operator Panel
• Registering an E-mail Group from the Operator Panel
• Registering an E-mail Address from the History
• Deleting a Registered E-mail Address from the Operator Panel
• Deleting a Registered E-mail Group from the Operator Panel

For details on character entry methods, refer to "Entering Characters (User's Manual)".

Press [Device Settings] on the touch panel.

Press [Address Book].

Press [E-mail Address].

Select a number, and then press [Register].

Press the registration button of [Name].

Enter a name, and then press [OK].

You can enter up to 16 characters.

Press the registration button of [E-mail Address].

Enter an e-mail address, and then press [OK].

Press [OK].

Registering an E-mail Address from the Operator Panel

Summary of Contents for MC573




























































































































































































































































































































































































































































































































Search results

Summary of Contents for MC573

Reviews:

Related manuals for MC573

Brands by name

Popular brands

Oki MC573, Advanced Manual

Search results

Summary of Contents for MC573

Reviews:

Related manuals for MC573

Brands by name

Popular brands