Oki MC573, Advanced Manual, Page: 271 / 507

- 271 -
6. Maintenance
Initializing Memory and Settings
This section describes how to initialize memory and settings saved in the machine.
• Initializing Flash Memory
• Initializing the Settings of the Device
When you initialize flash memory, the following data is deleted.
• The job data saved with [Shared Print] or [Private Print].
• Form data
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press or several times and press [Manage Unit].
5
Press [Storage Maintenance Setup].
6
Press [Initial Lock] to change the display to [Disable].
7
Press [Back].
8
Press [Flash Memory Setup].
9
Press [Initialize] or [Format].
Select from 2 ways of initializing memory.
• [Initialize]: Initializes the range of open area of Flash (displayed on File List).
• [Format Partition]: Initializes user information.You can format the PCL/Common/PS partitions respectively.
10
Press [Yes] on the confirmation screen.
Initializing Flash Memory