Oki MC160MFP, Network Manual

Page: 15 / 32

NETWORK SETTING Menu 1-9
DNS CONFIG.
"
When using network scanning and when specifying the SMTP server
as a host name instead of as an IP address, be sure to select
ENABLE
, and then specify the IP address of the DNS server.
DHCP
Purpose Sets whether or not the DNS server setting is to be speci-
fied.
If specifying the DNS server setting, the SMTP server can
be specified as a host name when using network scanning.
If
ENABLE
is selected, type in the IP address of the DNS
server.
If
DISABLE
is selected, the DNS server cannot be refer-
enced.
Options
DISABLE/ENABLE
Default
DISABLE
Range (If
DNS CONFIG.
is set to
ENABLE
)
0-255 for each xxx triplet
Use the keypad to input each number; use the and
keys to move between triplets.
Notes A single digit number, such as “1”, cannot be input as “001”.
Align the number on the left and input “1” as “1 _ _”. Use
the and keys to move between triplets.
The B
ACK
key can also be used for deleting. To cancel
DNS
CONFIG. menu, hold down the B
ACK
key for more than
one second, and then press the B
ACK
key again after all
settings have been cleared.
After changing the settings, the machine must be turned
off, then on again.
Purpose If there is a DHCP server on the network, specifies whether
the IP address and other network information is automati-
cally assigned by the DHCP server.
Options
DISABLE/ENABLE
Default
ENABLE