manualshive.com logo in svg

Oki MB760dnfax, User'S Manual And Troubleshooting Manual, Page: 62 / 83

Share
Download
Oki MB760dnfax User'S Manual And Troubleshooting Manual Download Page 62

Replacing Consumables / Maintenance Units

- 62 -

2

1

3

4

5

6

7

1

Insert your finger into the recess on the 
right side of the printer and pull the front 

cover open lever to open the front cover 
forward.

Note

• Open the front cover gently. If you open it rapidly, the 

MP Tray may open.

2

Remove the used image drum, together 
with the toner cartridge, in the direction of 
the arrow.

3

Remove the toner cover and desiccant.

4

Take out the new toner cartridge from its 
bag.

5

Peel off the tape from the toner cartridge.

6

Insert the toner cartridge into the image 
drum in the direction of the arrow.

Note

• Never load the toner cartridge with its tape adhered.

7

Turn the blue lever of the toner cartridge 
fully in the direction of the arrow.

Front cover 

Front cover 
open lever

Possible to get burned.

Do not throw a used image drum and toner 

cartridge in the fire. They may explode, and the 

toner inside may fly off and cause getting burned.

Warning

Toner cover

Tape

Blue lever

Summary of Contents for MB760dnfax




















































































Reviews:

No comments