120
T
Setup Items in PDL Setting Menu
LP-2050/LP-2050-MF User's Manual for Basic Printer Operation
Auto Scale
X
Y
Image
Image
Paper feed direction
z
X Scale (%)
z
Y Scale (%)
The parameters specify the scale values in x and y directions when the Scale Mode
is set to Manual Scale.
<Parameter by entering numbers>
0.01 to 1000.00
Default value = 100, Numbers indicate percentage for scale.
z
Numbers indicate percentage for scale.
z
This setting is enabled when the Scale Mode is set to Manual Scale. When the setting
is 100%, the image is printed at the same size.
z
Pen Width Scale (only with HP-GL and D-SCAN)
The parameter selects the scale mode applied to lines when an image is scaled
with x ratio equal to y ratio.
The lines includes:
- Solid lines
- Lines with dots and/or dashes repeated
<Parameter by selecting options>
n
: Default value
Off
The parameter does not apply the scaling to:
- Line widths
- Inter-dot distance
- Dash-dot distance
n
On
The parameter applies the scaling to:
- Line widths
- Inter-dot distance
- Dash-dot distance
However, note that the maximum line width is 16 mm.