8 Safety Information
Following information is for EU-member states only:
Disposal of batteries and/or accumulators based on EU-Directive on batteries and
accumulators and waste batteries and accumulators.
By ensuring that batteries and/or accumulators are disposed of correctly, you will help prevent
potential negative consequences for the environmental and human health, which could otherwise
be caused by inappropriate waste handling of this product.
For more detailed information about the take-back and recycling of batteries and/or accumulators,
please contact your supplier where you purchased this product.
This device is not intended for use in the direct field of view at visual display workplaces.
To avoid incommoding reflections at visual display workplaces this device must not be placed in the
direct field of view.
Duplex printing (if applicable)
Duplex printing enables both sides of a sheet of paper to be used, and therefore helps to reduce the
use of valuable resource’s by reducing your paper consumption. We recommend that this feature is
enabled whenever you print.
Recycled paper
This product can be used to print on recycled paper which is produced in accordance with European
standard EN 12281 or a similar quality standard. In addition it can support printing on paper down to
a weight of 64 g/m
2
, lighter paper means less raw materials and represents a resource saving.
Energy consumption
The amount of electricity a machine consumes depends as much on its properties as it does on the
way you use it. The machine is designed to allow you to reduce electricity consumption by switching
to “Ready” after the last print page. If required it can immediately print again from this mode. If no
additional prints are required, and after a certain time period, the device switches to energy saving
modes. This is power management.
In these modes the machine consumes less power (watts). If the machine is to print again it needs a
little longer to return from an energy-saving mode than from the Ready mode.
For maximum energy savings we advise the default values for power management should be used.
The Energy Star programme is a voluntary scheme to promote the development and purchase of
energy efficient models, which help to minimise environmental impact.
