Oki ES9160 MFP, Manual

Page: 26 / 182

2 HOW TO MAKE COPIES
24 Placing Originals
Placing Originals

Acceptable originals
When the RADF (Reversing Automatic Document Feeder, optional) is used, 2-sided originals can be automatically
scanned one sheet after another. When the original glass is used, originals such as OHP films, tracing paper, booklet or 3-
dimensional objects, that cannot be placed on the RADF can be scanned, as well as plain paper.
 Automatic size detection does not work properly when A/B format originals are used in equipment for North
America. It does not work properly when LT format originals are used in equipment other than that for North
America.
 Automatic size detection does not work properly when K format paper is used for printing. (K format is a standard
paper size in China.)
 Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.
 Be sure to place ST-size or A5-size originals in a landscape direction when using the RADF (optional).
 A maximum of 1000 sheets can be scanned per 1 copy job or up until the embedded memory becomes full.

Forgery prevention function
This equipment has a forgery prevention function. Therefore, scan or copy function might not operate correctly.
Location Maximum size Paper weight
Acceptable sizes for automatic
size detection
Original glass
Length: 297 mm (11.69")
Width: 432 mm (17.01")
—
Other than North America: A3, A4,
A4-R, A5-R, B4, B5, B5-R
North America: LD, LG, LT, LT-R,
ST-R
RADF (optional)
1-sided originals: 35 - 157 g/m
2
(9.3 - 41.8 lb.)
2-sided originals: 50 - 157 g/m
2
(13.3 - 41.8 lb.)
Other than North America: A3, A4,
A4-R, A5-R, B4, B5, B5-R, FOLIO
North America: LD, LG, LT, LT-R,
ST-R, COMP