Getting started > 22
7.
To use Actkey in Local PC mode (i.e. push scanning), it must be set as the program
to handle scanner events:
(a) Select
Start > Control Panel
.
(b) Double-click
Scanners and Cameras
.
(c)
Right-click the MFP icon and click
Properties
.
(d) Select the Events tab.
(e) Choose an event from the
Select an event
drop-down menu.
(f)
In the Actions field, click
Start this program
and choose
ActKey
from the
drop-down menu.
(g) Click
Apply
.
(h) Repeat steps
for each event, e.g. Scan to Application, E-mail, Folder and
PC-Fax.
(i)
Click
OK
to confirm.
NOTE
The following example uses Windows XP. The steps may vary if you are using
any other operating system, but the principle is the same.
