Oki ES5442 Advanced Manual Download Page 113

Page: 113 / 255

- 113 -

4. Troubleshooting

Problems on the Machine or Paper

This section describes problems with the machine and paper.

•

Problems on the Machine

•

Problems on Paper

•

If a Power Failure Occurs

•

Before Relinquishing Your Device

If you cannot solve a problem with the following solutions, contact your dealer.

• Nothing is displayed on the display screen after turning on the machine.

• The machine does not operate.

• The power switch LED lamp quickly flashes at approximately 0.3-second

intervals.

Problems on the Machine

Cause

Solution

Reference

The power cord is unplugged.

Turn off the machine, and then plug in
the power cord firmly.

Connecting the Power Code
(User's Manual)

The power is out.

Check whether the power is supplied
to the outlet.

Cause

Solution

Reference

The power cord is not firmly plugged
in.

Plug in the power cord firmly.

Connecting the Power Code
(User's Manual)

The machine is turned off.

Turn on the machine.

Turning On the Machine (User's
Manual)

Cause

Solution

Reference

A malfunction may occur in the
machine.

Unplug the power cord immediately,
and then contact your dealer.

Summary of Contents for ES5442
































































































































































































































































Oki ES5442, Advanced Manual, Page: 113 / 255

Search results

Summary of Contents for ES5442

Reviews: