ES3640e MFP User’s Guide
MFP Overview > 29
Tray and stacker examples
Loading Trays 1 to 4
Tray 1 is used in the following example.
1.
Pull out the tray.
2.
Press the paper rear stopper tab (1) and adjust the tab to
the required paper size.
3.
Fan the paper to be loaded then tap the edges of the stack
on a flat surface to make it flush.
4.
Load the paper (face down and top edge towards the right
for letterhead paper), press the tab (2) on the paper guide
and adjust the guides (3) for a snug fit to the paper.
To avoid paper jams:
1