3
3-79 Managing job flow
ES3640e MFP EFI Job Management Guide - 79
The following table describes job management commands in
greater detail and explains how each command affects the raster
data associated with a job:
Choose this
command
To do this
Raster data is
Prints the selected job in the
Active Jobs window, Printed Jobs
panel, FreeForm panel, or Archive
panel.
Temporarily held on the Fiery until
the job completes printing.
Hold
Holds the selected job waiting to
process in the Active Jobs
window, or the selected job in the
Printed Jobs or Archive panel, and
marks the job with either the
spooled/held flag or the
processed/held flag.
Held on the Fiery hard disk drive
indefinitely, if raster data is
included with job.
Process and Hold
Processes the selected job in the
Active Jobs window, Printed Jobs
panel, or Archive panel, and holds
a copy of the job. The copied job
is marked with the processed/
held flag.
Held on the Fiery hard disk drive
indefinitely.
Print and Hold
Prints the selected job in the
Active Jobs window, Printed Jobs
panel, or Archive panel, and holds
a copy of the job. The copied job
is marked with the processed/
held flag.
Held on the Fiery hard disk drive
indefinitely.
Remove Raster Data
Removes the raster data
associated with the selected
processed/held job in the Active
Jobs window, or with the selected
raster job in the Printed Jobs or
Archive panel; leaves the original
PostScript or PCL data in place.
Deleted.
Summary of Contents for ES3640eMFP
Page 1: ......
