Oki ES3640eMFP, Color Manual, Page: 105 / 115

A
A-105 Color Measurement Instruments
ES3640e MFP Color Guide - 105
Using the X-Rite DTP32 densitometer
ColorWise Pro Tools are designed to work with the X-Rite DTP32
reflection densitometer, which feeds color measurements to the
Fiery automatically.
Note:
Measurements from other densitometers can be input using
a simple ASCII file format (see Appendix B ).
Setting up the DTP32
Before you calibrate the Fiery using the X-Rite DTP32, you need to
connect, configure, and calibrate the densitometer to prepare for
measuring the printed patches (see
“Calibrating the DTP32” on
page A-107). For additional information about setting up and
using the DTP32, see the separate documentation included with
the densitometer.
To connect the X-Rite DTP32 to the computer
1. Turn off the computer.
2. Plug the square end of the interface cable (looks like a modular
phone plug) into the I/O port on the side of the X-Rite DTP32.
Square
connector