Oki ES3640e MFP User Manual Download Page 4

Page: 4 / 200

ES3640e MFP User’s Guide> 4

WARNING!

Ensure all warning and instruction labels on
this product are read, understood and followed
in order to prevent any risk of injury.

Ensure this and all other documentation is both
read carefully and retained for future
reference.

This product may be heavy. Please check the
weight of this product and take all necessary
precautions to prevent any risk of personnel
injury.

This product must be placed on a flat solid
surface strong enough to support its weight to
prevent any risk of injury.

Ensure that there is adequate ventilation all
around this product to prevent overheating and
any risk of fire.

Summary of Contents for ES3640e MFP









































































































































































































Search results

Summary of Contents for ES3640e MFP

Reviews:

Related manuals for ES3640e MFP

Brands by name

Popular brands

Oki ES3640e MFP, User Manual

Search results

Summary of Contents for ES3640e MFP

Reviews:

Related manuals for ES3640e MFP

Brands by name

Popular brands