Menu functions > 41
NETWARE
ENABLE
/
DISABLE
Enables or disables this network
protocol.
ETHERTALK
ENABLE
/
DISABLE
Enables or disables this network
protocol.
FRAME TYPE
AUTO
/ 802.2 /
802.3 /
ETHERNET II /
SNAP
Selects the Ethernet MAC layer frame
type.
IP ADDRESS
SET
AUTO
/
MANUAL
Specifies whether IP address allocation
is automatic (DHCP) or manually
assigned.
IP ADDRESS
xxx.xxx.xxx.xxx
Current assigned IP address. To
change, press
ENTER
and use
+
/
–
keys to increment 1st octet, then press
ENTER
again to move on to next octet.
When 4th octet has been set, press
ENTER
again to register new address.
SUBNET MASK
xxx.xxx.xxx.xxx
Current assigned subnet mask. To
change, proceed as above.
GATEWAY
ADDRESS
xxx.xxx.xxx.xxx
Current assigned gateway address. To
change, proceed as above.
WEB
ENABLE
/
DISABLE
Enables or disables Web config. facility.
TELNET
ENABLE /
DISABLE
Enables or disables Telnet config.
facility.
FTP
ENABLE /
DISABLE
Enables or disables communication via
FTP.
SNMP
ENABLE /
DISABLE
Enables or disables SNMP protocol.
NETWORK
SCALE
NORMAL
/
SMALL
Selects network size.
When NORMAL is selected, printer can
work effectively, even when connected
to a HUB that has a spanning tree
feature. However, printer start up time
gets longer when computers are
connected with two or three small
LANs.
When SMALL is selected, computers
can cover from two or three small LANs
to a large LAN, but may not work
effectively when connected to a HUB
that has a spanning tree feature.
ITEM
SETTINGS
EXPLANATION
