1 – English
Material Safety Data Sheet
# 58409401
Black Toner, Type D2: P/N 44947308
For more information, contact Oki Data at: 2000
Bishops Gate Boulevard, Mount Laurel, NJ 08054-
4620.
Emergency Information
: call 1-800-654-3282; US and
Canada only.
COMPOSITION/INFORMATION ON
INGREDIENTS
INGREDIENT(S)
CAS No.
wt.%
Polyester resin
- - -
80-90
Carbon black
1333-86-4
3-8
Wax
- - -
<10
Amorphous Silica
7631-86-9
<5
Titanium dioxide
13463-67-7
<2
- - -
TRADE SECRET
HAZARDS IDENTIFICATION
Emergency Overview:
If used as intended, the product does
not present acute or chronic health hazard.
Physical Hazards:
This product is not classified as
flammable or combustible. It will burn in case of fire. Avoid
contact with strong oxidizers such as chromate, bromate and
nitrates.
Routes of Exposure:
Inhalation, dermal contact, incidental
ingestion
Inhalation:
Excessive inhalation may cause irritation of the
nose, throat and respiratory tract.
Eye Contact:
Non-irritant.
Dermal Contact:
Non-irritant, non-sensitiser.
Ingestion:
Not currently known.
Chronic Effects:
See Section 11 Supplemental Health
Information.
Carcinogenicity:
See Section 11 Supplemental Health
Information.
Reproductive/Developmental:
Not identified.
Target Organs:
Prolonged breathing of high concentrations
may cause adverse effects on the respiratory system.
Signs and Symptoms of Exposure:
Prolonged exposure to
dusts of this product may irritate the respiratory system.
Medical Conditions Aggravated by Exposure to This
Product:
Respiratory disorders, such as asthma, may be
aggravated by prolonged exposure to high concentrations of
this product.
FIRST AID MEASURES
Eye Contact:
Immediately flush eyes with plenty of water for
at least 15 minutes. If irritation persists, call a physician.
Skin Contact:
Wash with soap and water. Wash clothing
before reuse. If irritation occurs or is persistent, seek medical
attention.
Ingestion:
Dilute stomach contents with several glasses of
water.
Inhalation:
Remove from exposure area to fresh air
immediately. Contact a physician if there is any difficulty in
breathing or other signs of distress.
FIRE FIGHTING MEASURES
General Hazard:
Product will burn in case of fire.
Flash Point:
Not applicable
Flammable Limits:
Not applicable
Autoignition Temperature:
Not applicable
Flammability classification:
Not applicable
Extinguishing Media:
Foam, halon, carbon dioxide, dry
chemical & water fog.
Unusual Fire & Explosion Hazard:
Combustible powder.
Dust of this product at sufficient concentrations can form
explosive mixtures with air.
Fire Fighting Procedures:
None
Hazardous Combustion Products:
Carbon monoxide,
carbon dioxide and smoke.
ACCIDENTAL RELEASE MEASURES
Spills or Leaks:
Vacuum-clean spilled toner and carefully
transfer into sealable waste container. If no vacuum-cleaner
is available, sweep slowly to minimize generation of dust
during clean-up. Residue can be removed with soap and cold
water.
HANDLING AND STORAGE
Handling:
Avoid dust, keep away from ignition sources.
Prevention of Fire and Explosion:
This material is capable
of creating a dust explosion. Keep away from heat, sparks &
flame.
Storage:
Keep container in cool and dry area.
Hygienic Practices:
Avoid inhalation and ingestion. Avoid
getting in eyes, on skin or clothing. Wash hands thoroughly
after handling, and before eating, drinking, or smoking.
EXPOSURE CONTROLS/PERSONAL
PROTECTION
Exposure Limits
OSHA PELs (TWA)
as the product:
15mg/m3 (Total dust) 5mg/m3 (Respirable
fraction)
Carbon black:
3.5 mg/m3
Other substances:
Not listed
ACGIH TLVs (TWA)
as the product:
10mg/m3 (Total dust) 3mg/m3 (Respirable
fraction)
Carbon black:
3.5 mg/m3
Other substances:
Not listed
DFG-MAK (TWA)
as the product:
4mg/m3 (Inhalable fraction) 1.5mg/m3
(Respirable fraction)
All substances:
Not listed
NOHSC (TWA)
All substances:
Not listed
Engineering Controls:
Maintain adequate ventilation.
Eye Protection:
Not required under intended use.
Skin Protection:
Not required under intended use.
Respiratory Protection:
Not required under intended use.
PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Fine solid powder
Color:
Black
Scent:
Odorless
Melting Point:
110 - 150 degree (Softening point)
Sp
ecific Gravity(H2O=1):
1.1 - 1.5
Vapor Pressure:
Not applicable
Vapor Density (Air=1):
Not applicable
Evaporation Rate:
Not applicable
Solubility in Water:
Negligible
pH Value:
Not a water-based product, therefore not
applicable.
Explosive Properties:
little possiblity in intended use.
According to Explosive Evaluation, can form explosive dust-air
mixtures when finely dispersed in air, like most finely grained
organic powders.
STABILITY AND REACTIVITY
Stability:
Stable
Incompatibility:
Not identified.
Hazardous Decomposition Products:
Carbon monoxide
and carbon dioxide.
Hazardous Polymerization:
Will not occur.
