281
– Issues:
Copying Issues
MC361/MC561/CX2731 MFP Advanced User’s Guide
The Copied Output Is Different from the
Original Document
Unable
to
copy.
Is the Continuous
Scan mode on?
Select [Start sending] on the display
screen.
Is the MFP off line?
Press the <PRINT> key on the control
panel, and then select [On-Line].
Do you have access to
make copies?
Enter your authorized PIN or user
name and password.
Unable
to copy
mixed
size
docum
ents.
Is [Mixed Size] set to
[OFF]?
Set [Mixed Size] to [ON].
Is the size of your
document compatible
for making mixed size
copies?
Use documents of sizes supported for
mixed size copying.
Is paper of all the
sizes of your original
loaded?
Load paper of the required sizes on
each paper tray. The paper trays need
to be set to [ON] or [ON(Prior)] from
the <SETTING> key > [Paper Setup]
> [Select Tray] > [Copy].
Unable
to sort
copies.
Is [Sort] set to [OFF]?
Set [Sort] to [ON].
Is there memory
overflow?
Install additional RAM (optional), or
reduce the number of documents.
Symptom
Point to check
Remedy
The copied output is
different from the
original document.
Is [DuplexCopy]
enabled?
Set [DuplexCopy] to
[OFF].
Is [Mixed Size] set
to [ON]?
Set [Mixed Size] to
[OFF].
Sympt
om
Point to check
Remedy
