Oki COREFIDO B822dn User Manual Download Page 422

Page: 422 / 453

Troubleshooting

- 422 -

White streaks appear in the vertical direction

Cause

Solution

Reference

The LED head is dirty.

Wipe the LED head with soft tissue paper.

Cleaning the LED
head

(P.348)

The toner is low.

When "Toner Low." or "Install Toner" is displayed, replace
the toner cartridge.

Replacing toner
cartridges

(P.312)

The window film of the image drum
is dirty.

Wipe the window film with soft tissue paper.

Cleaning the
light-shielding
film

(P.356)

The image drum has not been
installed correctly.

Please install the image drum correctly.

Replacing the
image drum and
the toner
cartridge

(P.320)

A foreign object is stuck in the
image drum.

Please replace the image drum.

Replacing the
image drum and
the toner
cartridge

(P.320)

Printing is faint in the vertical direction

Cause

Solution

Reference

The LED head is dirty.

Wipe the LED head with soft tissue paper.

Cleaning the
main unit and the
parts

(P.348)

The toner is low.

When "Toner Low." or " Install Toner" is displayed, replace
the toner cartridge.

Replacing toner
cartridges

(P.312)

The paper is not supported.

Use recommended paper.

Applicable
paper

(P.82)

Summary of Contents for COREFIDO B822dn






































































































































































































































































































































































































































































Oki COREFIDO B822dn, User Manual, Page: 422 / 453

Search results

Summary of Contents for COREFIDO B822dn

Reviews: