manualshive.com logo in svg

Oki COREFIDO B822dn, User Manual, Page: 29 / 453

Share
Download
Oki COREFIDO B822dn User Manual Download Page 29

Preparing and connecting this machine to your PC 

- 29 - 

5 

Close the Wireless LAN module cover. 

 

6 

Plug the power cord to this machine. 

 

Connecting the power cord

(P.41) 

Refer to the next section for the procedure for connecting via a wireless LAN. 

 

Connection form via a wireless LAN

(P.51) 

 

Connecting via an access point (Infrastructure)

(P.52) 

 

Connecting directly with this machine (AP mode)

(P.64) 

Installing the Wired LAN module 

Install it if you want to connect this machine to two different networks with a wired LAN. After installation, you 
need to enable the Wired LAN module on the operator panel. 
This section describes the procedure for installing the Wired LAN module and enabling the Wired LAN module 
on the operator panel. 

 

  LAN1 engraved on the LAN port refers to a standard wired LAN, and LAN2 refers to an extended wired LAN. 

  It cannot be used together with the Wireless LAN module at the same time. 

Model: EL-A1 

 

 

1 

Turn off the power supply of this machine, and disconnect the power cord. 

 

  If you install it with the power supply turned on, the main unit or Wired LAN module may be damaged. 

 

Turning the power off

(P.81) 

 

 

 

Summary of Contents for COREFIDO B822dn






































































































































































































































































































































































































































































Reviews:

No comments