C9850 User’s Guide> 91
O
PTIONAL
ACCESSORIES
This section describes optional accessory equipment for your printer.
The following accessories are available:
>
second, third paper tray (to increase paper input capacity)
>
high capacity feeder (equivalent to three paper trays)
NOTE
Tray configurations are: Tray 1 only, Tray 1 + 2nd Tray, Tray 1 +
2nd Tray + 3rd Tray, Tray 1 + HCF, Tray1 + 2nd Tray + HCF
>
Finisher (for stapling or saddle stitching printer output)
>
Punch unit (to extend Finisher functionality)
A
CCESSORY
ORDER
INFORMATION
I
NSTALLING
ACCESSORIES
Each accessory comes complete with its own documentation which
gives full instructions on installation. You are advised to follow these
instructions carefully.
After installation, print out a Menu Map (Configuration document) to
check that the installation has been successful.
NOTE
The Finisher and Punch unit must be installed by an authorized engineer.
For the following accessories, you have to make the appropriate
setting in your printer driver(s):
>
paper tray(s)
>
Finisher
ITEM
ORDER NUMBER
Second, third paper tray
42831301
High capacity feeder (HCF)
42831501
Finisher:
4-tray
5-tray
70050701
70050801
Finisher Punch Unit:
2-3 hole
42872902
Summary of Contents for C9850hdn
