Oki C9800hdtn, Configuration Manual

Page: 135 / 170

6
6-1 Configuring the Fiery and clients for WebTools
Fiery WebTools allow you to manage your Fiery remotely from the Internet or from
your company’s intranet. The Fiery has its own home page, from which you can select
a variety of functions, including Status, WebLink and WebDownloader.
For more information on using Fiery WebTools, see the Printing Guide .
Configuring the Fiery and clients for WebTools
The Fiery WebTools provide access to many Fiery functions via the Internet (or
intranet), providing additional flexibility in remote management.
T
O SET UP
W
EB
T
OOLS ON THE
F
IERY
1. In Fiery Network Setup, enable TCP/IP.
2. Set a valid, unique IP address for the Fiery, and then set the subnet mask.
Set a gateway address, if required.
3. Enable Web Services.
4. In Fiery Printer Setup, confirm that the Print Queue is published.
T
O SET UP
W
EB
T
OOLS ON A COMPUTER
1. Enable TCP/IP networking.
2. Assign the workstation a valid, unique IP address and subnet mask, and a gateway
address if required.
3. Install an Internet browser that supports the Java language and frames.
Make sure Java is enabled. For more information on supported browsers and Fiery
WebTools requirements, see the
User Software Installation Guide .
Chapter 6:
Configuring
Fiery WebTools