Oki C9800hdn Color Manual Download Page 29

1

1-29

PostScript printer driver for Windows and Mac OS

C9800 Color Guide - 29

Adobe PostScript printer driver for Mac OS

This section explains how to set color management print options with the AdobePS 
printer driver for Mac OS, a PostScript 3 driver that takes full advantage of the color 
features of the Fiery and allows you to save a set of print option settings.

Before you continue, complete the following procedures, as described in the 

User Software Installation Guide

 Chapter 2

 

:

• Install the AdobePS printer driver and the Fiery PPD.

• Select the Fiery in the Chooser and set it up with the Fiery PPD.

• Install the ICC output profile for the Fiery on your Mac OS computer (see the 

User Software Installation Guide

 Chapter 2

).

N

OTE

:

The following illustrations and instructions do not apply to all applications. 

Many applications, such as Adobe PageMaker, Adobe Photoshop, Adobe Illustrator, 
QuarkXPress, and CorelDRAW, have other color management options in addition to 
those presented in the printer driver. For information on specific applications, see the

 

Fiery Color Reference

.

Setting color management print options

Choose settings for color print options from the various panes of the AdobePS driver 
dialog box. To access the initial AdobePS dialog box, choose Print from the File menu 
of your application.

N

OTE

:

The term “pane” is used to describe the different pages that appear in the driver 

dialog box when you make selections from the menu at the upper-left corner of the 
dialog box. Each pane presents a particular set of print options.

The AdobePS driver includes the following Color Matching options.

Color/Grayscale

—When this setting is used to print to the Fiery, ColorWise 

provides all color conversions on the Fiery. Typically, use this option when printing 
to the Fiery.

PostScript Color Matching

—Can be used with PostScript devices, such as the Fiery. It 

provides for color conversion using a color rendering dictionary (CRD) that is 
downloaded with the print job. This method requires that the file is saved as an EPS 
with PostScript Color Management selected.

Summary of Contents for C9800hdn





































































































Reviews: