Home
/
Oki
/
C9600dn
/
Configuration Manual

Oki C9600dn, Configuration Manual, Page: 213 / 259

Share

Page: 213 / 259

Oki C9600dn Configuration Manual Download Page 213

Troubleshooting: EtherTalk • 213

Troubleshooting:
EtherTalk

Not identified by the Chooser and the Setup Utility.

•

Turn the printer off and on again.

•

Make sure the network cable is correctly connected.

•

Change the cable and try again.

•

If the network resides in a Zone, make sure the correct Zone
name is selected in the Chooser.

•

Make sure the Zone name in the utility related to the NIC is the
same as the Zone name set in NIC.

•

Make sure AppleTalk, which is displayed at the right bottom of the
Chooser, is set to Enable. (In some OS versions Network is used
instead of AppleTalk.)

•

Make sure Ethernet is selected in AppleTalk. (In some OS
versions Network is used instead of AppleTalk.)

•

Make sure the print driver is selected in the Chooser.

•

Make sure the EtherTalk protocol is set to Enable.

•

Print the NIC settings (see page 12) and confirm that the
EtherTalk Port name is not blank.

«
...
211
212
213
214
215
...
»

Summary of Contents for C9600dn




































































































































































































































































Reviews:

No comments