Introduction • 12
Self-Diagnostic Test
With the printer power switched on, press the print server test button
for more than three seconds and release. The self-diagnostic test
results (normally “OK”) and Network Information configuration
settings are printed.
The printout contains the following network information:
•
Printer Information
•
General Information
•
TCP/IP Configuration
•
NetWare Configuration
•
EtherTalk Configuration
•
NetBEUI Trap Configuration
•
Email Configuration
•
SNMP Trap Configuration
•
IPP Configuration
•
Time/SNTP Configuration
•
Security
•
Maintenance
NOTE
If “NG” is displayed for the self- diagnostic test instead
of “OK” see page 208.