Oki C910, User Manual, Page: 35 / 112

35
– C910 Getting Started
Checking Current Settings
Carry out the following steps to generate a Configuration report
(Menu Map) to confirm that your printer is correctly configured.
1. Ensure that there is Letter paper in Tray 1 (to be used in this
operation).
2. Ensure that the display panel indicates that the printer is
ready to print.
3. Press the Up-arrow or Down-arrow buttons repeatedly
until Print Information is highlighted.
4. Press the Enter button to select Print Information.
5. Press the Up-arrow or Down-arrow buttons repeatedly
until Configuration is highlighted.
6. Press the Enter button to select Configuration.
7. Press the Enter button to execute the command and a
Configuration document is printed.
8. After printing the configuration document, the printer returns
to the ready to print status.
You can use this document to check your printer
configuration. System values and installed accessories are
listed at the top of the first page while status values and
settings follow.
Interfaces and Connection
Your printer is equipped with a selection of data interfaces:
• Parallel – For direct connection to a PC. This port requires a bi-
directional (IEEE 1284 compliant) parallel cable.
• USB – This port requires a cable conforming to USB version 2.0 or
above.
The printer may not work if a USB- compatible device is
connected concurrently with other USB-compatible machines.
When connecting multiple printers of the same type, they
appear as *****, ***** (2), ***** (3), etc. These numbers
depend on the order of connecting or turning on each printer.
• Ethernet – For network cable connection.