manualshive.com logo in svg

Oki C834, User Manual, Page: 151 / 188

Share
Download
Oki C834 User Manual Download Page 151

- 151 -

7. Maintenance

• The front cover cannot be closed securely if the output tray is not closed.

11

If optional additional tray units are installed, detach the parts connecting the 
machine and the additional tray units.

Follow the steps for installation in reverse to detach.

Installing the Additional Tray Unit(s)

• Take care not to lose the connecting parts.

• Do not yet detach the parts connecting the additional trays.

12

Lift the printer up and detach from the additional trays.

• Pack the printer unit and optional additional tray units separately and transport them.

13

Attach the packing material to the machine, and put it in the packing box.

14

If there are multiple additional trays or caster bases installed, detach the parts 
connecting them and pack together with each connecting part.

Follow the steps for installation in reverse to detach.

Installing the Additional Tray Unit(s)

• Take care not to lose the connecting parts.

• After transporting the machine, when reinstalling, remove the tape securing the image drums and toner cartridges.

Summary of Contents for C834





























































































































































































Reviews:

No comments