Oki C7200, Service Manual

Page: 390 / 391

paper reverse in
the Duplex unit. Duplex unit, or replace
it.
Check DUPLEX
371: Paper Jam Paper jam
detected at the
Duplex unit 1) Is a paper jammed in the Duplex
unit? Yes
No Remove the paper jam.
Check the Duplex unit,
or replace it.
Check DUPLEX
372: Paper Jam Paper jam
detected during
paper feed from
the Duplex unit 1) Does misfeed occur in the Duplex
unit? Yes
No Remove the misfed
paper and close the
cover. Check the
Duplex unit, or replace
it.
Open Side
Cover 380:
Paper Jam Paper jam during
paper feed fro the
Cassette 1, 2, 3,
4 or 5. 1) Does misfeed occur in the specified
cassette? Yes
No Remove the jammed
paper and install the
cassette. Check the
cassette 1, 2, 3, 4, or 5
or replace it.
Open Stacker
Cover 381:
Paper Jam Paper jam
detected between
the B ID and
Fuser 1) Is a paper jammed between the Y ID
and Fuser?
2) Is the load on the Fuser unit
normal? Yes
NO Remove the jammed
paper. Replace the
Fuser unit.
Open Stacker
Cover 382:
Paper Jam Paper jam
detected in the
Fuser unit or
between the
Fuser and paper
ejection. 1) Is a paper jammed in the Fuser unit
or between Y ID and Fuser unit?
2) Is the Paper eject switch working
normally? Yes
No Remove the jammed
paper. Replace the
Fuser unit.
Open Stacked
Cover 383:
Paper Jam Paper jam
detected on
paper entering
the Duplex unit. 1) Is paper jammed at the entrance of
the Duplex unit or in the unit? Yes
No Remove the jammed
paper and close. Check
the Duplex unit, or
replace it.
Check MP Tray
390: Paper Jam Paper jam during
paper feed from
the MP tray 1) Does misfeed occur around the MP
Tray? Yes
No Remove the misfed
paper and close the
cover. Check the MP
Tray, or replace it.
Check Tray *
391 ~ 395:
Paper Jam Paper jam
detected between
a cassette and B
ID. 1) Is a paper jammed around the
cassette or between B ID and cassette.
2) Does the Paper entry switch operate
normally? Yes
No Remove the jammed
paper. Replace the
Paper entry switch.
Open Stacker
Cover 400:
Paper Size Error Paper in a size
different (45 mm
or more) from the
specification
detected at the
Printer engine. 1) Is the paper in a custom size?
2) Is the paper in the standard size? Yes
Yes
No No action required.
Adjust the Paper size
guide of the cassette.
Replace the Paper size
board.
Toner Low Toner in one of 1) Is the specified toner cartridge Yes Replace it with a new