Oki C711WT Network Manual Download

Page: 6 / 51

Network configuration > 6

ETWORK

CONFIGURATION

NTRODUCTION

Your machine incorporates a fast 100BASE-TX/10BASE-T network interface. This guide

explains the functionality of the built in network interface. Access for interconnection is

provided via an interface panel at the rear of the machine.
This network interface supports IEEE802.2, IEEE802.3, Ethernet-II and SNAP, and can

detect those frame types automatically.
Also, the interface supports major protocols such as TCP/IP, IPX/SPX (NetWare) and

NetBEUI.
This guide details the network interface specification and several software utilities.
You should set the emulation in the printer menu settings to Auto or PS before printing the

configuration map.

NOTE
Not all utilities, features or protocols are supported by every operating
system. Please check with your support website for latest information.

Summary of Contents for C711WT




















































Search results

Summary of Contents for C711WT

Reviews:

Related manuals for C711WT

Brands by name

Popular brands

Oki C711WT, Network Manual

Search results

Summary of Contents for C711WT

Reviews:

Related manuals for C711WT

Brands by name

Popular brands