Oki C542 User Manual Download

Page: 22 / 126

- 22 -

2. Setting Up

Eject the connector from the cover and connect with the wireless LAN module.

Install the wireless LAN module to the machine.

Close the wireless LAN module cover.

After installing the wireless LAN module, press [Device Settings] > [Admin Setup] > [Network Setup] and enable the
wireless setting.

Attach the the additional tray unit when increasing the number of sheets or paper to be set is
needed.

Up to 2 trays can be installed.

Set the number of trays on the printer driver after installing them.

Check that the machine is turned off and power cord and all the cables are
unplugged.

Installing the additional tray unit with the machine turned on may cause the machine and additional tray unit to
malfunction.

Installing the Additional Tray Unit

Model Number: N36501

Injury may result.

Lift this machine by 2 persons, because it weighs approximately 24 kg.

Summary of Contents for C542































































































































Search results

Summary of Contents for C542

Reviews:

Related manuals for C542

Brands by name

Popular brands

Oki C542, User Manual

Search results

Summary of Contents for C542

Reviews:

Related manuals for C542

Brands by name

Popular brands