Oki C5400 Series, Installation Instructions Manual, Page: 3 / 24

3
(continued on next page)
Windows Network Installation: Model C5400n Only
Software: TCP/IP
Note:
Installing a printer on a network is best handled by
someone familiar with networks (such as a network
Administrator).
For more detailed information on the OkiLAN
®
8100e SoftNIC print server, see the OkiLAN
8100e User’s Guide on the Manuals CD supplied
with your printer.
Included Network Software for
TCP/IP
Your driver CD includes the following network software:
Oki LPR
Supports TCP/IP printing. Creates an OKI printer port
and installs a pop-up utility to monitor the printer status.
Admin Mgr / Quick Setup Utility
Use this to set up the various computers on your network
for use with the printer. Can be run directly off the CD or
installed on the computer.
•
For users who do not have/want IIS loaded on
their system.
•
This utility has a Quick Setup button for users
not familiar with network administration.
Storage Device Manager Utility
Manages the hard disk drive (optional on most models)
and the printer’s built-in flash memory.
Web Driver Installer Utility
Use this to discover printers connected to a TCP/IP
network and to display discovered printers on a web page
so that clients can download the necessary drivers
directly from that URL.
•
Requires Microsoft IIS 4 or above .
PrintSuperVision
Provides access to network printer data for monitoring,
reporting and managing networked printers.
•
Installs on either IIS or PWS Microsoft Web
servers.
Job Accounting
Tracks network printer usage by job, user, or Account ID
for internal reports and bill-back purposes.
Network Printer Status
Creates an additional STATUS tab in the printer
Properties dialog box.
The IP Address
An IP address is required to install the drivers. If you are
using DHCP, the IP address will automatically be detected.
If you are
not using DHCP, you need to obtain the IP
Address from your network Administrator and enter it using
the front panel:
□
Press
+
until you see
NETWORK MENU
on the display,
then press
ENTER
.
□
Press
+
until you see
IP ADDRESS SET
, then press
ENTER
.
□
Press
+
to change the setting to
MANUAL
, and press
ENTER
, then
BACK
.
□
Press
+
(
IP ADDRESS
appears
)
, then press
ENTER
.
□
Use the
+
and
–
to set each set of digits in the IP
Address, pressing
ENTER
to go to the next set of digits.
□
Press
BACK
, then press
ON LINE
.