2 English
7. Install the new priming cartridges (orange label
on top) supplied with the image drum. Be sure
to put them in the proper color sequence.
Lower each cartride into place (1), then slide
the blue locking collar (2) to the left to secure
the cartridges in place.
Important!
Do not re-install your old toner cartridges at
this time.
8. Close the top cover and press down firmly so
that the cover latches closed.
Note
The machine automatically starts the priming
process which takes about 4 minutes. The
Attention LED flashes and the LCD screen
illuminates. Ignore any on-screen messages.
When the priming process is complete, the
light on the LCD screen goes out and the motor
stops turning. If the Attention LED continues
to flash, ignore it.
9. Press the cover release (1) and open the
printer’s top cover fully (2).
10. Slide the locking collars to the right (1) and
remove the priming cartridges (2). Place them
in the disposal bags (3) supplied and discard in
accordance with local regulations.
11. Remove the original toner cartridges from the
old image drum (1, 2) and install them in the
new image drum (3, 4).
12. Place the old drum in the shipping packaging
and discard in accordance with local
regulations.
13. Close the top cover.
The machine automatically initializes.
a
c
