Oki C3530n MFP, Network User'S Manual

Page: 7 / 35

Network User’s Guide for C3400n and C3530 MFP
Network Configuration - 7
S
PECIFICATION
S
ELF
-
DIAGNOSTIC TEST
With the printer power switched on, press the TEST button located on the
Network Interface Panel (at the rear of the printer) for more than three
seconds and then release. The self-diagnostic test results and configuration
settings are printed.
On the first page of the Network Information that is printed out, under the
heading “General Information” the MAC or Ethernet Address is given. For
example:
MAC Address 00:80:87:D4:FA:00
D
EFAULT USER NAME AND PASSWORD
To apply configuration changes using a Web browser, you will be prompted
for a username and password. The username is ‘
root ’ and the default
password is the last six characters of the Ethernet (MAC) address, e.g.
‘
D4FA00 ’ (any alpha characters must be in upper case).
You can change the root password to allow you to change settings and
configure the printer through the Web browser. You can find instructions on
how to change the password for the Network Card Setup sections for Windows
or Mac.
ITEM SPECIFICATION
Frame Types IEEE 802.2
IEEE 802.3
Ethernet-II, SNAP, AUTO
Network Interface 100BASE-TX
10BASE-T
Network Protocols TCP/IP
Network layer ARP,
Session layer TCP, UDP
Application layer LPR, HTTP, BOOTP, DHCP,
SNMP, DNS.
Functions Self-diagnostic test printing
Monitoring and configuration by Web browser