Oki B6200dn Reference Manual Download Page 120

Page: 120 / 163

116

6 Daily Care

Printing Reports/Lists

Print the report/list by operating the control panel.

Press the <MENU> button to display the Menu screen.

Press the <

> or <

> button until [Report/List] is displayed, then press the <

button.

Press the <

> or <

> button until the desired report/list is displayed, then press the

> button.

Note
• To print the next list, check that [Print Language] is displayed and press the <

> button. Press the <

or <

> button until the desired list is displayed, then press the <

> button.

Press the <FEED/SELECT> button.
The selected report/list will be printed.

Note
• Reports/lists cannot be output to the rear tray. When the rear tray is installed, lower the rear output tray

lever.

Press the <MENU> button when printing has completed.

• PostScript

Logical Printers List

• ESC/P Settings List

• HP-GL/2

Settings List

• HP-GL/2

Logical Printers/Stored Jobs List

• TIFF Settings List

• TIFF Logical Printers List

• PDF Settings List

• PCL Settings List

• PCL Form List

Summary of Contents for B6200dn




































































































































































Search results

Summary of Contents for B6200dn

Reviews:

Related manuals for B6200dn

Brands by name

Popular brands

Oki B6200dn, Reference Manual

Search results

Summary of Contents for B6200dn

Reviews:

Related manuals for B6200dn

Brands by name

Popular brands