(continued on back)
Caution!
To avoid damage by static electricity
or rough handling, keep the memory
card in its packaging until you're
ready to install it.
Note:
The printer has two slots in
which to install an optional
RAM Memory card.
1. Turn off the printer, and remove the
power cord and interface cable.
2. Loosen the thumbscrews at the top
and bottom of the left side cover.
3. Slide the cover toward the rear of
the printer and then downward to
remove it.
4. Locate the slot for the card:
Caution!
To avoid damage to the RAM card,
ground yourself (touch metal) before
handling it.
5. Remove the RAM memory card
from its packaging.
6. Hold the card with the components
facing up, and the gold contact
edge aimed away from you.
7. Insert the card in the slot and press
firmly into place. Push the white
tabs against the sides of the card to
lock it in place.
8. Replace the side cover:
a. Insert the top part of the left side
cover into the printer. Make sure
the locking tab aligns with the
hole in the printer’s side.
b. Slide the side cover towards the
front of the printer to install it
c. Tighten both thumbscrews.
9. Reattach the interface cord and
power cable, then turn on the
printer.
256 MB RAM Memory Expansion
Option for B6100
Installation Instructions
Oki Data Americas, Inc., 2000 Bishops Gate Blvd., Mt. Laurel, NJ 08054-4620
Phone: (856) 235-2600 Fax: (856) 222-5320 http://www.okidata.com http://my.okidata.com
Memory Part Number
70045801
