Oki B6100n, Configuration Manual

Page: 42 / 54

B-2 Ethernet Network Interface Card Configuration Guide
About this Appendix
7KLVDSSHQGL[RIIHUVYDULRXVWURXEOHVKRRWLQJSURFHGXUHVDQGWHFKQLFDOVXSSRUWDGYLFH
Power-Up Troubleshooting
7KHUHDUHVHYHUDOSRVVLEOHHUURUVLWXDWLRQVLIWKHXQLWGRHVQRWGLVSOD\WKHZHOFRPHPHVVDJHRUWKH/('VGR
QRWIODVK
Error Messages
Message Diagnosis/Remedy
Power-up diagnostic failure (hardware
failure) Note which LED is blinking and its color, then contact
your dealer or Technical Support.
The NIC boots but does not try to load
the Flash ROM code Briefly press the Test button on the NIC’s I/O panel. A
NIC configuration page will be printed. (To press the
Test button, you will need a pointed object - e.g. paper
clip.)
Network Error: The ACT LED will
blink yellow 2-3 times per second Make sure the Ethernet network cable is properly
connected and reboot the server.