Installing UNIX Printing Software on a SUN Solaris System
UNIX Printing Software Administration and Installation Guide
8/25/02
5-77
Installing UNIX Printing Software on a SUN Solaris
System
Instructions for installing UNIX Printing Software on a Sun System are as follows:
1. Enter the following command at the command line. Press
RETURN
.
#
./lpspr_install
The following prompt appears:
Select LPSROOT [/opt/lpspr]:
LPSROOT
is an upper level directory structure under which the rest of the code
will be installed.
2. Press
RETURN
to accept the default, or enter another pathname to be used by
LPSROOT.
Another prompt appears:
Select LPRCOM [/usr/bin/lpr]:
3. Enter the following new pathname for
LPRCOM
. Press
RETURN
.
/usr/bin/lp
Another prompt appears:
Select LPRFLAG [-P]
4. Enter the following new flag for LPRFLAG:
# LPRFLAG [-P]:-d
The following message appears:
Installation is successful.
i
If the installation is unsuccessful, you must deinstall the existing software,
before you can reinstall it. Refer to the section,
“Deinstalling UNIX Printing
Software” on page 5-78
for instructions on how to accomplish this task.
