93 > B411/B431 Overlays and Macros (Windows Only)
Test printing the macro
1.
Choose
Printers
>
Test Macro
.
2.
In the Test Macro window, enter its ID number and click
OK
. After a short pause the printer will print the macro.
3.
When each macro has been tested, click
Exit
.
4.
Click the standard Windows
Close (X)
button, or choose
Projects
→
> Exit
to close Storage Device Manager.
Defining overlays
This is the final step before the new overlays are ready for use.
1.
Open the Printers (called “Printers and Faxes” in
Windows XP) window via the
Start
menu or the Windows
Control Panel.
2.
Right-click on the Relevant PostScript printer icon and
choose
Printing Preferences
from the pop-up menu.
3.
On the Job Options tab, click the
Overlay
button.
4.
In the Overlay window, Click the
Define Overlays button
(1).
5.
In the Define Overlays window,
enter the
name
(a) and
I
D (b) of
the required overlay, and define
which
page(s)
(c) of your
documents will use this overlay.
Then click the
Add button
(3) to
add this overlay to the list of
defined overlays. Repeat for any
other related overlays. When
done, click the
Close button
(4)
to close the window.
1
a
3
b
4
c
Summary of Contents for B411d
