Oki B2200, User Manual

Page: 32 / 36

B2200/2400 User’s Guide
LED indicators > 32
P
RINT CARTRIDGE MIS
-
INSTALLED
If the print cartridge (combination of image drum and toner
cartridge) is not located properly this will also cause the error
light to illuminate, and it will usually be impossible to latch the
top cover fully down. To install the print cartridge, tilt the front
down slightly to slide it under the guides. Then press the
cartridge down firmly until it snaps into place
.
Push the blue lock
lever all the way forward.
T
ONER OR IMAGE DRUM CARTRIDGE INAPPROPRIATE
If you install either a toner cartridge or image drum unit that is
incompatible with your printer, the error LED will flash at
approximately 1-second intervals and the printer will not start.
L
OW TONER CONDITION
If the toner cartridge is out of toner the error LED will flash. In
this case you may be able to resume printing for a small number
of pages by opening and then closing the top cover. Note also
that this condition may be occur even after you have installed a
new toner cartridge if you forget to correctly position the colored
toner lever when installing the toner cartridge. (See picture
above.)
O
THER POSSIBLE ERROR CONDITIONS
If your printer, or the printing preferences on your computer
specify a different paper size or media type than the one you are
using, this may cause an error condition to occur. (
See “Setting
printing preferences” on page 18. )