Home
/
Oki
/
8100e
/
User Manual

Oki 8100e, User Manual, Page: 97 / 106

Share

82 pages before
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106

Page: 97 / 106

Oki 8100e User Manual Download Page 97

Apple Macintosh 97

APPLE MACINTOSH

Overview

The OkiLAN 8100e supports the Apple Macintosh AppleTalk
environment. This guide is for administrators and it should be read in
conjunction with the relevant Macintosh manual. The latest
Macintosh service packs should be installed.

Supported Versions

All Macintosh operating systems from OS 8.1 are supported.

Printing the Network Interface Card Configuration Sheet

The printer’s configuration page reports information that is required
for Macintosh configuration. To print a configuration page, while the
printer is switched on, depress the NIC’s push-button for three
seconds and then release.

The first six characters of the Ethernet address are the same for all
OkiLAN 8100e network cards. The last six characters of the Ethernet
address are unique to each card.

This is all the information that is required to setup the OkiLAN 8100e
for Macintosh.

«
...
95
96
97
98
99
...
»

Summary of Contents for 8100e











































































































Reviews:

No comments