Oki 62433101, User Manual

Page: 109 / 137

Maintenance > 109
M
AINTENANCE
R
EPLACING CONSUMABLE ITEMS
T
ONER CARTRIDGE REPLACEMENT
The toner used in this machine is a very fine dry powder. It is contained in one cartridge.
Have a sheet of paper handy so that you have somewhere to place the used cartridge while
you install the new one.
Dispose of the old cartridge responsibly, inside the pack that the new one came in. Follow
any regulations, recommendations, etc., which may be in force concerning waste recycling.
If you do spill any toner powder, lightly brush it off. If this is not enough, use a cool, damp
cloth to remove any residue.
Do not use hot water, and NEVER use solvents of any kind. They will make stains
permanent.
1. Lift the Scanner.
NOTE
When the on-screen display indicates that the toner is low, or if print appears
faded, first open the top cover and try tapping the cartridge a few times to
evenly distribute the toner powder. This will enable you to obtain the best
“yield” from your toner cartridge.
CAUTION!
To avoid toner wastage and possible toner sensor errors, do not
change the toner cartridge until “TONER EMPTY” is displayed.
WARNING!
If you inhale any toner or get it in your eyes, drink a little water or
bathe your eyes liberally in cold water. Seek medical attention
immediately.