manualshive.com logo in svg

Oki 1.2, Installation Manual, Page: 53 / 60

Share
Download
Oki 1.2 Installation Manual Download Page 53

45

Maintenance

Explanation of the displayed information

Display

Displayed contents

Description

item

Mode

Operation mode

Operation mode

Setup mode

Setup mode

Installation mode

Installation mode

VoIP line

Line locked

The VoIP line is unusable.

Idle

The VoIP line is ready. No communication.

Outgoing

Originating via the VoIP line.

Incoming

Terminating from the VoIP line.

Telephone call in progress.

A call via the VoIP line in progress.

PSTN line

Line power is not detected.

The PSTN line cannot be detected.

Idle

The PSTN line is ready. No communication.

Outgoing

Originating via the PSTN line.

Incoming

Terminating from the PSTN line.

Telephone call in progress.

A call via the PSTN line in progress.

Holding

A call via the PSTN line is currently on hold.

LAN

Usable

The LAN is available.

Unusable

The LAN is not available.

VoIP 

VoIP telephone number

Current telephone number of the VoIP-TA. 

telephone

When a VoIP telephone number is obtained 

number

from a gatekeeper, the number is displayed on

the screen. 

See gatekeeper settings page 34.

Call 

VoIP telephone number

VoIP telephone number of the transfer 

forwarding

destination specified by 

absent service

.

No setting

No transfer destination for 

absent service

is set.

Click the 

Close

button.

Summary of Contents for 1.2





























































Reviews:

No comments