Portable PA System
This compact portable PA system features a sturdy, lightweight injection molded cabinet. The system includes a high
power 50W (RMS) amplifier and can be supplied with an MP3 compatible anti-skip CD player and up to two wireless
microphone receivers. The in-built amplifier has balanced or unbalanced wired microphone inputs, plus line in and
line out RCA connections. The radio microphone receivers are 96 channels (16 channels for frequency band at
863-865MHz), allowing easy selection of non-interfering frequencies. Each receiver includes individual frequency
adjustment and volume control. The system is supplied with in-built batteries and charging facility to provide 3-4 hours
continuous use..The two way speaker system comprising an 8 inch woofer and high frequency horn ensures excellent
sound quality for both music and speech reproduction.
Weighing only 12kgs it is truly portable allowing a wide range of use in schools, places of worship, clubs, auctions etc.
Sets up in just seconds for instantaneous use.
TX-701 Optional wireless audio link transmitter:
For larger venues or audiences, the addition of this module allows
several units to be used in the same area without the need for speaker or signal wiring. In this application you have a
master and as many slave units as required for the venue. The wireless audio link module is fitted to the master unit
which then transmits any audio signal (including wireless mic, CD player or wired mic) to the slave units, which are
fitted with a UHF wireless microphone receiver adjusted to receive the signal from the wireless audio link.
DR-701 Optional UHF wireless microphone receiver:
Installation of this module adds a second wireless micro-
phone to the Portable PA.
EM-750 Optional karaoke echo module:
For karaoke applications this module includes adjustable repeat and delay,
plus two local wired 6.35mm/XLR combo mic inputs.
Features
Operation
Compact design sets up in just seconds
Rugged lightweight cabinet
MP3 compatible CD player
Inbuilt carry handle
High performance 50W RMS amplifier
Built in backup battery
Optional radio microphone receivers
Suitable for desk or speaker stand mounting
Optional wireless audio link for cable free transmission to additional systems
Optional karaoke echo module
Provision for 8 ohm extension speaker
RCA line input / output
6.35mm / XLR combination wired microphone input
96 -264VAC mains or battery operation
Power & Charging Functions
The portable PA system is powered by 96 - 264V AC mains via IEC socket (see figure 2 for location) or via the internal
battery pack. When operating for the first time the internal battery will require charging for up to 8 hours. Charging
will occur whenever the unit is plugged into the 96 - 264VAC mains supply. The charge status indicator (shown in figure
2) will illuminate red when charging. Once battery is 80-90% charged, the indicator will flash red and green. Once
charging is complete, the indicator will illuminate green.
When in use without mains power, the LED built into the power switch provides indication of battery status:
100% to 30% capacity:
no illumination
30% to 10% capacity:
red illumination
<10% capacity:
flashing red illumination
2